Cat6 Extender Kit Ideal for Digital Signage in Schools and Workplaces This 4K transmitter/transceiver extender kit is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127A-111-BDTH extends 4K signals from a DisplayPort source to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling.
Extends Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color The B127A-111-BDTH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with 7.1-channel surround sound and 36-bit Deep Color. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. Advanced 4:4:4 chroma subsampling is ideal for top-level PC gaming or using your HDTV as a PC monitor.
Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution To monitor the video signal being extended to the transceiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.
Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks Power over Cable (PoC) technology powers the connected receivers over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receivers where needed without worrying about finding a nearby AC outlet.
Create a Daisy Chain of Displays to Achieve Even More Distance This extender kit is capable of forming daisy-chain installations up to 920 feet (280.4 meters) from the transmitter by connecting additional B127A-110-BH transceivers (sold separately) and HDMI displays. Up to four total B127A-110-BH transceivers can be chained together, each capable of extending a 4K/60 Hz signal up to 230 feet per unit. The transceiver is also compatible with Tripp Lite's B127A-010-H signal booster (sold separately), which allows the signal to be boosted up to 400 feet (121.9 meters) total between the transmitter and transceiver. When used in a daisy-chain installation, this brings the total extension distance up to 1,090 ft. (332.2 meters).
Note : B127A-010-H will only work when used in the first link of the daisy-chain installation.
Plug-and-Play Operation for Quick Setup and Immediate Use The included transmitter and transceiver work right out of the box with no software required. Mounting hardware is included for installing the units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite’s P580-Series). Then, connect the transceiver to the display with a user-supplied HDMI cable (such as Tripp Lite’s P568- or P569-Series). Finally, connect the two units with user-supplied Cat6 cable (such as Tripp Lite’s N202-Series).
TAA-Compliant for GSA Schedule Purchases The B127A-111-BDTH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Specification:
| Features |
|---|
| Material |
Metal |
| Colour depth |
36 bit |
| Audio output channels |
7.1 channels |
| Wall mountable |
Yes |
| Rack mounting |
Yes |
| Consumer Electronics Control (CEC) support |
Yes |
| 3D |
Yes |
| Maximum refresh rate |
60 Hz |
| Type |
AV transmitter & receiver |
| Maximum resolution |
3840 x 2160 pixels |
| Cable types supported |
Cat5, Cat5e, Cat6, HDMI |
| Maximum transfer distance |
2759.8" (70.1 m) |
| Audio system |
Multichannel |
| LED indicators |
Yes |
| Cable length |
54.3" (1.38 m) |
| Product colour |
Black |
| Extended display identification data (EDID) |
Yes |
| Ports & interfaces |
|---|
| Remote (IR) output |
2 |
| Remote (IR) input |
2 |
| RJ-45 input ports |
1 |
| RJ-45 output ports |
2 |
| HDMI in |
1 |
| Number of HDMI outputs |
2 |
| DC-in jack |
Yes |
| Connectivity technology |
Wired |
| Digital audio optical out |
1 |
| Power |
|---|
| Input current |
0.6 A |
| Output current |
1 A |
| AC input voltage |
100 - 240 V |
| AC input frequency |
50-60 Hz |
| Operating voltage |
24 V |
| Operational conditions |
|---|
| Operating relative humidity (H-H) |
0 - 85% |
| Storage temperature (T-T) |
-15 - 50 °C |
| Operating temperature (T-T) |
0 - 40 °C |
| Weight & dimensions |
|---|
| Receiver weight |
16 oz (453 g) |
| Transmitter weight |
16 oz (453 g) |
| Transmitter dimensions (WxDxH) |
2.46 x 1.06 x 4.53" (62.5 x 26.9 x 115 mm) |
| Receiver dimensions (WxDxH) |
2.46 x 1.06 x 4.53" (62.5 x 26.9 x 115 mm) |
| Packaging data |
|---|
| Package depth |
6.46" (164.1 mm) |
| Package width |
10.2" (260.1 mm) |
| Package height |
2.17" (55.1 mm) |
| Package weight |
23.3 oz (660 g) |
| Packaging content |
|---|
| Mounting kit |
Yes |
| Cables included |
IR |
| AC adapter included |
Yes |
| Manual |
Yes |
| Included power plug types |
AU, EU, NA, UK |
| Technical details |
|---|
| Country of origin |
Taiwan |
| Sustainability compliance |
Yes |
| Sustainability certificates |
CE, REACH, RoHS |
| Logistics data |
|---|
| Master (outer) case width |
22.6" (573 mm) |
| Master (outer) case length |
10.7" (273 mm) |
| Master (outer) case height |
6.89" (175 mm) |
| Master (outer) case gross weight |
15.2 lbs (6.9 kg) |
| Products per master (outer) case |
10 pc(s) |
| Master (outer) case GTIN (EAN/UPC) |
10037332258615 |
