HDMI Receiver Ideal for Medical Environments The B127M-100-H pairs with Tripp Lite’s B127M-004-H splitter or B127M-101-H extender kits (all sold separately) to receive 4K video for medical applications in hospitals, clinics, physicians’ offices and other medical environments where the source and display are farther apart than conventional A/V cables allow. This receiver conforms to strict EMI/RFI and ESD requirements and can be used as a replacement receiver for Tripp Lite's B127M-101-H extender kit.
Receives a 4K A/V Transmission from Up to 230 ft. The B127M-100-H receivers combine with the Tripp Lite B127M-004-H four-port splitter to extend 4K signals from an HDMI source device to HDMI displays up to 230 feet away via user-supplied Cat6/6a cabling. Connect as many as four B127M-100-H receivers to the B127M-004-H to complete a long-distance multi-monitor installation.
Receives Crystal-Clear 4K Video with Multi-Channel Audio The HDCP 2.2-compliant B127M-100-H supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with 36-bit Deep Color, 4:4:4 chroma subsampling and full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on 4K displays.
Meets EMI/RFI and ESD Requirements Necessary for Use in Medical Applications This 4K receiver meets CISPR 11- Group 1 Class A and IEC 61000-4-2 (ESD) Test level 4 standards for environments with strict EMI/RFI and ESD limitations. It is approved for medical applications where reducing electrical interference is vital to the proper functioning of equipment.
Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both this receiver and the connected transmitter or splitter will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the B127M-100-H where needed without worrying about finding a convenient AC outlet.
Plug-and-Play Operation for Quick Setup and Immediate Use The B127M-100-H works right out of the box with no software required. Mounting hardware is included for installing the receiver on a wall, pole or 19-inch rack. Connect up to four receivers to HDMI displays (HDTV, projector, monitor, etc.) with user-supplied HDMI cables (such as Tripp Lite’s P569-XXX-CERT Series). Then, connect the splitter or transmitter to the source (Blu-ray player, cable box, laptop, media server, etc.) with a user-supplied HDMI cable. Finally, connect the splitter or transmitter to the B127M-100-H with user-supplied 26AWG STP Cat6/6a patch cable (such as Tripp Lite N262-Series).
TAA-Compliant for GSA Schedule Purchases The B127M-100-H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Specification:
| Features |
|---|
| Material |
Metal |
| HDCP |
Yes |
| Colour depth |
36 bit |
| Audio output channels |
7.1 channels |
| Electrostatic Discharge (ESD) protection |
8 kV |
| 3D |
Yes |
| Type |
AV transmitter & receiver |
| Maximum resolution |
3840 x 2160 pixels |
| Cable types supported |
Cat6, HDMI |
| Maximum transfer distance |
2755.9" (70 m) |
| Audio system |
Multichannel |
| Supported video modes |
720p, 1080p, 2160p |
| Supported graphics resolutions |
1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160 |
| LED indicators |
Yes |
| Cable length |
54.4" (1.38 m) |
| Product colour |
Black |
| Extended display identification data (EDID) |
Yes |
| Electrostatic Discharge (ESD) protection |
Yes |
| HDCP version |
1.4/2.2 |
| Ports & interfaces |
|---|
| Ethernet LAN |
Yes |
| RJ-45 input ports |
1 |
| RJ-45 output ports |
1 |
| HDMI in |
1 |
| Number of HDMI outputs |
2 |
| HDMI version |
2.0 |
| DC-in jack |
Yes |
| Connectivity technology |
Wired |
| Power |
|---|
| Input current |
0.6 A |
| Output current |
1 A |
| AC input voltage |
100 - 240 V |
| AC input frequency |
50/60 Hz |
| Operating voltage |
24 V |
| Operational conditions |
|---|
| Storage relative humidity (H-H) |
0 - 85% |
| Operating relative humidity (H-H) |
0 - 85% |
| Storage temperature (T-T) |
-15 - 50 °C |
| Operating temperature (T-T) |
0 - 40 °C |
| Weight & dimensions |
|---|
| Receiver weight |
15.9 oz (450 g) |
| Transmitter weight |
15.9 oz (450 g) |
| Transmitter dimensions (WxDxH) |
4.53 x 2.46 x 1.06" (115 x 62.4 x 27 mm) |
| Receiver dimensions (WxDxH) |
4.53 x 2.46 x 1.06" (115 x 62.4 x 27 mm) |
| Packaging data |
|---|
| Package type |
Box |
| Package depth |
6.46" (164.1 mm) |
| Package width |
10.2" (260.1 mm) |
| Package height |
2.17" (55.1 mm) |
| Package weight |
26.8 oz (760 g) |
| Packaging content |
|---|
| Mounting kit |
Yes |
| Cables included |
AC |
| AC adapter included |
Yes |
| Manual |
Yes |
| Included power plug types |
AU, EU, NA, UK |
| Technical details |
|---|
| Country of origin |
Taiwan |
| Sustainability compliance |
Yes |
| Sustainability certificates |
CE, REACH, RoHS |
| Logistics data |
|---|
| Master (outer) case width |
22.6" (573 mm) |
| Master (outer) case length |
10.7" (273 mm) |
| Master (outer) case height |
6.89" (175 mm) |
| Master (outer) case gross weight |
17.4 lbs (7.9 kg) |
| Products per master (outer) case |
10 pc(s) |
| Master (outer) case GTIN (EAN/UPC) |
10037332262674 |
