B162-001-POE - Tripp Lite HDMI OVER IP EXTENDER TRANSMITTER 4K 4:4

Converts HDMI audio/video to an IP-based signal that is transmitted to a receiver 328 ft. away via Cat6 cable or a dedicated Ethernet network switch. An Effective Digital Signage Solution Designed for Easy Setup and Operation This Tripp Lite HDMI over IP extender transmitter delivers visually lossless 4K signals with low latency up to 328 feet (100 meters) via a standard Gigabit Ethernet switch. Engineered to meet today’s demands of large-scale, multi-display 4K signal transmission, the B162-001-POE is ideal for a wide range of indoor environments, such as trade shows, airports, university campuses, conference centers and shopping centers. Lightweight Compression with Ultra-Low Latency This transmitter uses advanced video lossless compression technology to extend true 4K video at 60 Hz or true 4K video at 30 Hz with 4:4:4 chroma subsampling. Choose from three different levels of video compression rate to match your application, including Smooth, Balance and High Quality. LEDs indicate connection and power status. Supports Power over Ethernet to Save You Money and Give You More Installation Choices When installed in combination with a PoE Ethernet switch in a multipoint-to-multipoint setup, this PoE extender transmitter can be powered through a shielded Cat6 cable, though an external power supply is included. Power over Ethernet gives you the flexibility to install the transmitter in an area away from AC outlets, such as ceilings or high up on a wall or shelf. Note: When power is available from both the Cat6 cable and the power supply, the power supply will receive priority. Limitless Scalability and Flexibility Mix and match the latest 4K displays in simple point-to-point setups or more elaborate multipoint-to-multipoint setups via LAN (local area network) without distance limitations. In conjunction with Tripp Lite’s B162-100-POE extender receivers, this transmitter offers multi-functionality in video wall and daisy-chain applications. Collaboration with Control System You can manage and configure the extender via CLI telnet, TCP or RS-232 commands from a connected computer. Just one click via touch panel or keypad is needed to operate a display, source and related equipment. Spontaneous Scheduling Management A user-friendly scheduling management function lets you pre-plan the display schedule, manage events in the calendar and set events to one-minute intervals. You can integrate all B162-Series devices in the application to arrange the profile by grouping individual receivers or video walls. Multiple profiles may be arranged to play in any order over a selected period. No Complicated IP Setup Switch effortlessly among input source devices via buttons on the top panel. No extensive IT experience is required to operate. Web GUI-Based Management Use a web browser or IP address to link directly to the transmitter’s built-in utility program, the DVOE Manager. It lets you configure transmitter settings, monitor statuses and create display templates. Daisy-Chain Up to 30 Units Connect multiple B162-100-POE receivers (sold separately) through a dedicated Ethernet network switch. Cabling and system deployment is easy with fewer cables needed. The daisy-chain function is especially ideal for large-scale deployment covering a wide area, such as hotels, airports, shopping malls and expo centers. Note: Only the first level supports PoE. All B162-Series units connected on the second level and above need an external power supply. Create a Video Wall The B162-001-POE supports an 8 x 8 video wall (64 displays) in either horizontal or vertical orientation. Switching layout profiles, previewing the wall and dragging-and-dropping input sources is accomplished through the GUI. Embedded Audio Support A separate audio signal may be embedded into the HDMI stream. Multiple Control Channels Manage control methods via Ethernet or the top-panel buttons. A USB 2.0 port allows connection to the source device. A bi-directional IR channel allows IR transmission one way at a time. A bi-directional RS-232 serial port connects a computer for serial control. Note: In order to save bandwidth and optimize video performance, the USB, IR and RS-232 ports are disabled by default. Access the DVOE Manager to enable them

 

Specification:

 

Features
Material	Metal
HDCP	Yes
Colour depth	36 bit
Rack mounting	Yes
Maximum refresh rate	60 Hz
Certification	FCC, PSE, UL, WEEE
Type	AV receiver
Maximum resolution	4096 x 2160 pixels
Cable types supported	Cat5, Cat5e, Cat6
Maximum transfer distance	3937" (100 m)
Supported video modes	2160p
Supported graphics resolutions	3840 x 2160, 4096 x 2160
LED indicators	Power
Cable length	59.1" (1.5 m)
Product colour	Black
Extended display identification data (EDID)	Yes
HDCP version	1.4
Ports & interfaces
USB ports quantity	2
Ethernet LAN	Yes
USB connector type	USB Type-A
RJ-45 input ports	2
HDMI in	1
Connectivity technology	Wired
Power
Power over Ethernet (PoE)	Yes
Input current	0.5 A
Output current	3 A
Power plug type	Type A
Operating voltage (receiver)	5 V
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	4.36 W
Operational conditions
Operating relative humidity (H-H)	0 - 80%
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Weight & dimensions
Width	5.01" (127.2 mm)
Height	1.14" (29 mm)
Depth	6.7" (170.2 mm)
Weight	23.6 oz (670 g)
Packaging data
Package type	Box
Package depth	6.81" (173 mm)
Package width	11.1" (283 mm)
Package height	2.44" (62 mm)
Package weight	31.7 oz (900 g)
Quantity per pack	1 pc(s)
Technical details
Country of origin	Taiwan
Sustainability certificates	CE, REACH, RoHS
Logistics data
Master (outer) case width	13.3" (337.6 mm)
Master (outer) case length	11.8" (300 mm)
Master (outer) case height	7.64" (194.1 mm)
Master (outer) case gross weight	9.92 lbs (4.5 kg)
Products per master (outer) case	5 pc(s)
Master (outer) case GTIN (EAN/UPC)	10037332263824