SMT3000RMI2U - APC SMART-UPS 3000VA LCD RM 2U 230V

Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Predictive replace battery date Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Outlet group control Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups). Sequenced shutdown and restart Configure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups). Audible alarms Provide notification of changing flywheel conditions InfraStruXure Central compatible Enables centralized management via APC InfraStruXure Central. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding. Wide input voltage range Designed for harsh electrical environments to save battery life. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance High online efficiency Reduces utlility costs, generates less heat. LED Indicators Provide easy-to-read status of your utility power conditions, UPS and battery. Cold-start capable Provides temporary battery power when the utility power is out. Serial Connectivity Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power and UPS conditions. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) USB connectivity Provides management of the UPS via a USB port (not available on all models). Serial Connectivity Provides management of the UPS via a serial port. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Network manageable Provides remote management of the UPS over the network. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Adjustable voltage sensitivity Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement.

 

Specification:

 

Power
Output frequency	50/60 Hz
Output power	2700 W
Input operation voltage (min)	151 V
Input operation voltage (max)	302 V
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Surge energy rating	320 J
Emergency Power Off (EPO)	O
Output power capacity	3 kVA
Input frequency	50/60 Hz
Ports & interfaces
Cable length	78.7" (2 m)
AC outlets quantity	9 AC outlet(s)
AC outlet types	C13 coupler, C19 coupler, C20 coupler
Power plug	C20 coupler
USB 2.0 ports quantity	1
Performance
Audible alarm modes	Battery replacement
UPS topology	Line-Interactive
Waveform	Sine
Auto-restart	Yes
Response time	4 ms
LED indicators	Yes
Surge protection	Yes
Noise level	55 dB
Audible alarm(s)	Yes
Features
Output frequency	50/60 Hz
Web-based management	Yes
Audible alarm modes	Battery replacement
UPS topology	Line-Interactive
Waveform	Sine
Auto-restart	Yes
Response time	4 ms
Output power	2700 W
Input operation voltage (min)	151 V
Input operation voltage (max)	302 V
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Surge energy rating	320 J
Surge protection	Yes
Emergency Power Off (EPO)	O
Noise level	55 dB
Audible alarm(s)	Yes
Output power capacity	3 kVA
Input frequency	50/60 Hz
Battery
Battery capacity	547 Ah
Battery technology	Sealed Lead Acid (VRLA)
Battery recharge time	3 h
Hot-swap battery	Yes
Cold start	Yes
Automatic battery test	Yes
Design
Rack capacity	2U
Form factor	Rackmount
LED indicators	Yes
Product colour	Black
Certification	CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE
Cable length	78.7" (2 m)
Display type	LCD
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	0 - 95%
Storage relative humidity (H-H)	0 - 95%
Operating altitude	0 - 118110.2" (0 - 3000 m)
Non-operating altitude	0 - 590551.2" (0 - 15000 m)
Technical details
Output voltage	230 V
Output frequency	50/60 Hz
Sustainability certificates	RoHS
Harmonized System (HS) code	85078000
Management features
Web-based management	Yes
Weight & dimensions
Package width	23.6" (600 mm)
Package depth	38.6" (980 mm)
Package height	10" (254 mm)
Weight	97.4 lbs (44.2 kg)
Width	18.9" (480 mm)
Package weight	113.8 lbs (51.6 kg)
Height	3.39" (86 mm)
Depth	26.9" (683 mm)
Packaging data
Resource CD	Yes
Rack mount kit	Yes
Quick installation guide	Yes
Cables included	Input power cable, USB cable
Package width	23.6" (600 mm)
Package depth	38.6" (980 mm)
Package height	10" (254 mm)
Package weight	113.8 lbs (51.6 kg)
Logistics data
Products per pallet	8 pc(s)
Certificates
Certification	CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE
Other features
Output voltage	230 V
Packaging content
Resource CD	Yes
Rack mount kit	Yes
Quick installation guide	Yes
Cables included	Input power cable, USB cable